These sure-lock Black Nylon Kwik-Links are self threading nylon for 2MM (0.079") rods or threaded couplers. Ideal for replacements on imported A.R.F.'s and kits. Unit looks like nylon clevis 2nd from right except is black.
SKU Number: DUB669
Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods. This brass connector has hex head to allow you to hold it while tightening.
SKU Number: DUB608
The Safety Lock Kwik-Link offers everything a modeler could want in a clevis and more. Simply put, it's ingenious, a grand slam!
Self tapping, no slop threads.
Square shank for easy installation & adjustment.
Brass plated stepped steel pin - no binding on control horns or servo arms.
Brass plated steel safety lock slides into groove on pin for a secure and solid lock.
Safety Lock is mounted in a track system on clevis.
3 sizes available:
Available in 2 & 12 per packages.
Ideal for upgrading or replacement on A.R.F.'s.
Super strong, super tough. More strength then you'll ever need.
10% lighter than steel clevis'.
Size stamped on safety lock for positive identification.
Weight: 1 gram/Safety Lock Kwik Link
Made in USA
US PAT# 6,364,566
SKU Number: DUB818
GWS rack of 6 L bend ratainers. Simply bend an "L" into the end of your wire, put the eyelet of this retainer over the L end then clip the base over the leg of your wire. Perfect solution for quick and easy pushrod ends.
SKU Number: GWPRH20AA
Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods so common in ARFS.
SKU Number: DUB489
Use on 2mm pre-threaded pushrods. Metal clevis pin with safety retainer. 2 each package.
SKU Number: DUB819
Gold-N-Clevises. These tempered steel clevises are the strongest clevises made. They feature an interlocking collar, welded pin and an exclusive steel retaining clip to prevent accidental opening. They are brass or tin plated for easy soldering.
(2) 2mm Clevises and Retaining Clips
Heat treated tin plated spring steel
Secure Retaining clips- prevents accidental openings
Clevis can be soldered
Interlocking collar with 2mm threads
Clevis pin is welded into place for strength
Two 2mm clevis
Two retaining clips
Used to connect a 2mm pushrod to a control such as a control horn or throttle lever.
SKU Number: SUL529
Four barrels, washers, nuts and set screws. Allen wrench not included, requires 1.5mm. Will work on any rod size 1.5 to 1.85mm (.074"). 2mm pushrods and 2-56 are usually this size or smaller. The threads are rolled and larger than the base wire diameter. Instal in 5/64" (1.9mm) hole.
SKU Number: EZADJRE17
Four barrels, washers, nuts and set screws. Allen wrench not included, requires 1.5mm. Will work on any rod size 1.5 to 2mm (.079"). 2mm pushrods and 2-56 are usually this size or smaller. The threads are rolled and larger than the base wire diameter. Install in 7/64" (2.6mm) hole.
TEMPORARILY OUT OF STOCK
SKU Number: EZADJRE20
Clevis threads onto 2mm shaft. Metal clevis pins are 1mm od (.039). May also be used with micro size .032" drilled control horns with very minor increase in hold diameter. Very light weight design. 10 clevis and pins per package. Package of extra snap pins for this clevis is pn#MPJ2102.
SKU Number: MPJ2101B
Clevis threads onto 2mm shaft. Metal clevis pins are 1.6mm od (.063 1/16"). May also be used standard horns designed for typical 2-56 hardware. However, must be threaded onto a 2mm pushrod thread. Very light weight design. 10 clevis and pins per package. Extra snap pins are PN# MPJ2112.
SKU Number: MPJ2111B
Extra snap pins for MP Jet Micro Clevis. Control horn engaging section of pin is 1.0mm.
SKU Number: MPJ2102
Extra snap pins for MP Jet small Clevis. Control horn engaging section of pin is 1.6mm.
SKU Number: MPJ2112