The DU-BRO Micro Push Rod System is a lightweight and easy-to-install control linkage designed for small to medium electric RC airplanes. It gives you smooth, accurate control while keeping the weight of your model as low as possible. This makes it perfect for foamies, indoor planes, park flyers, and small electric aerobatic models.

Each package includes two complete push rod systems, so you can set up two control surfaces--such as the elevator and rudder. Everything you need is included, and the parts are designed to work together for simple, clean installation.

Each set contains: 

• 2 pushrods with a pre-bent 90° end, ready to use
• 2 pushrod housings that guide the rods and stop them from bending
• 2 Micro E/Z Links for attaching to your control horn
• 2 Mini E/Z Connectors for attaching to your servo arm and making easy adjustments
   

These components allow for smooth movement with very little friction. They also make it easy to fine-tune your control surfaces so your airplane responds the way you want it to.

The Micro Push Rod System is available in four different weights to fit a wide range of aircraft sizes: 

• #847 - 3.2 grams per set
• #852 - 4.6 grams per set
• #922 - 5.7 grams per set
• #941 - 18 grams per set (for slightly larger electric planes) 

This system works great on: 

• Indoor flyers
• Small park flyers
• Slow flyers
• Foamies and EPP aircraft
• Lightweight scratch-built planes 

Installation is quick and beginner-friendly. The housings glue easily to your model, and the connectors make attaching and adjusting your pushrods simple.

Proudly Made in the USA, the DU-BRO Micro Push Rod System provides a dependable and lightweight way to get precise control from your electric RC aircraft. 

This item qualifies as a Rod Stock Item, read below:

Rod Stock Policy:

In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. Weight is in grams per meter, as per the manufacturer documentation, no guarantees on weight.

Find other qualifying items to mix and match to meet the 6PC Minimum Purchase Requirement:

Single 4-40 x 30" Threaded Push Rod. Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods are available 3/4" (19 mm) thread on one end (.093" rods w/4-40 thread), perfect for making custom lengths for your needs. 

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

2mm x 762mm (30") threaded on one end pushrod. 1 each.

Each rod is 30 inches (762 mm) long, making them ideal for long control runs, large fuselages, multi-servo setups, or detailed custom builds. You can cut and shape the rods to the exact length you need, and they will still keep their strong threads and rigid structure. This helps prevent flexing or unwanted play in your control system.

Their extra length and stiffness make these rods perfect for larger electric models, glow or gas aircraft, giant-scale planes, or any model where strength and accuracy matter. They help deliver smooth, consistent control and also reduce strain on your servos--especially important for high-performance flying or aerobatic routines.

This 6-piece pack offers great value for builders working on multiple aircraft or stocking their workshop. DU-BRO hardware has been trusted for decades, and these 2mm threaded rods continue that tradition of quality, reliability, and ease of use. They are a must-have item for any serious RC builder.

In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. Weight is in grams per meter, as per the manufacturer documentation, no guarantees on weight.

Find other qualifying items to mix and match to meet the 6PC Minimum Purchase Requirement:

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome. (6-Pack meets the 6PC Min. Purchase Requirement.)

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Made in USA

Minimum order 6 pieces Rod Stock items. Mix and match (items & sizes) welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. 

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Each package includes two complete push rod systems, so you can set up two control surfaces--such as the elevator and rudder. Everything you need is included, and the parts are designed to work together for simple, clean installation.

Each set contains:

• 2 pushrods with a pre-bent 90? end, ready to use
• 2 pushrod housings that guide the rods and stop them from bending
• 2 Micro E/Z Links for attaching to your control horn
• 2 Mini E/Z Connectors for attaching to your servo arm and making easy adjustments

These components allow for smooth movement with very little friction. They also make it easy to fine-tune your control surfaces so your airplane responds the way you want it to.

The Micro Push Rod System is available in four different weights to fit a wide range of aircraft sizes:

• #847 - 3.2 grams per set
• #852 - 4.6 grams per set
• #922 - 5.7 grams per set
• #941 - 18 grams per set (for slightly larger electric planes)

This system works great on:

• Indoor flyers
• Small park flyers
• Slow flyers
• Foamies and EPP aircraft
• Lightweight scratch-built planes

Installation is quick and beginner-friendly. The housings glue easily to your model, and the connectors make attaching and adjusting your pushrods simple.

Proudly Made in the USA, the DU-BRO Micro Push Rod System provides a dependable and lightweight way to get precise control from your electric RC aircraft.

This item qualifies as a Rod Stock Item, read below:

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. Weight is in grams per meter, as per the manufacturer documentation, no guarantees on weight. Find other qualifying items to mix and match to meet the 6PC Minimum Purchase Requirement:

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match item types and sized welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%. 

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

TEMPORARILY OUT OF STOCK 

Minimum order 6 pieces (this item counts as 3) Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

TEMPORARILY OUT OF STOCK 

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634

Minimum order 6 pieces Rod Stock items. Mix and match welcome.

Rod Stock Policy: In order to include long skinny products at our very favorable shipping rates: All USA orders that contain rod-stock items need to contain at least 6 rods. Rod stock is anything over 30". This would include Music Wire, Carbon Rods of any kind, larger Pushrod kits, brass or aluminum rods and anything else of that nature. Thinner items like carbon strips .5mm thick, sub 1mm diameter carbon rods and music wire .020 or thinner ordered in quantities less than 6 rods total will be shipped coiled. Unless otherwise stated, all carbon rod stock is pull-truded construction grade. The resin is heat cured as the fibers are pulled through a die of the proper shape. Sizes are approximate usually within 5%.

https://www.radicalrc.com/category/Rod-Stock-Policy-Items-634