|
| |
Coil spring pre-bent in 5/32 wire. Ready for you to custom fit to your project. 1:Bend your axle over at desired height 2: Cut pivot leg to length (if you need to) and you're done.
SKU Number: DUB154
|
|
|
|
|
| |
3-3/4 Inch Steerable Nose Gear Bent (from center of coil to end) Coil Spring pre-bent in 5/32 wire. Axle pre-bent to standard length. Complete with pillow blocks, steering arm and fasteners. Left most set in drawing (wheel not included). The DU-BRO Steerable Nose Gear is a dependable, shock-absorbing nose wheel system designed to give RC pilots smoother taxiing, better steering control, and improved ground handling. Built from heavy-duty 5/32" (4 mm) wire, this nose gear is strong enough to handle the demands of sport, trainer, and scale aircraft while still offering the flexibility needed to absorb bumps and rough landings. Models #152 and #153 come as complete nose gear systems. Each includes: - Nylon nose gear blocks
- A smooth-operating steering arm
- All mounting hardware
This gives you everything you need to install a fully functioning steerable nose wheel right out of the package. These versions provide excellent durability and reliable steering response for a wide range of RC airplanes. Model #154 includes only the 5/32" wire, making it a great option for builders who already have mounting hardware or want to create a custom setup. Model #156 includes: - Two nylon mounting blocks
- Four bolts
- Lock washers and nuts
- One spacer
This set is perfect for pilots who want mounting hardware specifically designed for 5/32" (4 mm) wire. Weight by Model: - #152: 55 grams
- #153: 62 grams
- #154: 42 grams
- #156: 13 grams
The DU-BRO Steerable Nose Gear delivers smooth, positive steering on the ground, helping your plane track straight during takeoff and giving you tighter, more controlled turns while taxiing. The shock-absorbing design reduces stress on the airframe and makes landings softer and more forgiving--perfect for beginners and experienced pilots alike. Proudly Made in the USA, the DU-BRO Steerable Nose Gear is a high-quality upgrade for any RC pilot looking to improve reliability, control, and craftsmanship in their aircraft.
SKU Number: DUB152
|
|
|
|
|
| |
6-5/8" Nose Gear Straight (from center of coil to end) Coil spring straight with 5/32 wire. Axle is unbent ready for you to make to your own custom length. Complete with pillow blocks, steering arm and fasteners. Middle set in drawing. (wheel not included)
SKU Number: DUB153
|
|
|
|
|
| |
Completely pre-bent set length nose gear. The length is the measurement from the bottom of the coil to the center of the axle. MANUFACTURER BACKORDER, OUT OF STOCK
SKU Number: SIGSH596
|
|
|
|
|
| |
Completely pre-bent set length nose gear. The length is the measurement from the bottom of the coil to the center of the axle. TEMPORARILY OUT OF STOCK
SKU Number: SIGSH597
|
|
|
|
|
| |
Completely pre-bent set length nose gear. The length is the measurement from the bottom of the coil to the center of the axle. TEMPORARILY OUT OF STOCK, MANUFACTURER BACKORDER
SKU Number: SIGSH717
|
|
|
|
|
| |
Complete assembly with pillow block, strut, streering arm and all fasteners. Strut is pre-bent with set length as per title above. The length is the measurement from the bottom of the coil to the center of the axle. TEMPORARILY OUT OF STOCK
SKU Number: SIGSH601
|
|
|
|
|
| |
Complete assembly with pillow block, strut, steering arm and all fasteners. Strut is pre-bent with set length as per title above. The length is the measurement from the bottom of the coil to the center of the axle. TEMPORARILY OUT OF STOCK
SKU Number: SIGSH602
|
|
|
|
|
| |
Complete assembly with pillow block, strut, steering arm and all fasteners. Strut is pre-bent with set length as per title above. The length is the measurement from the bottom of the coil to the center of the axle. TEMPORARILY OUT OF STOCK
SKU Number: SIGSH719
|
|
|
|
|
| |
Complete assembly with pillow block, strut, steering arm and all fasteners. Strut is pre-bent with set length as per title above. The length is the measurement from the bottom of the coil to the center of the axle.
SKU Number: SIGSH603
|
|
|
|
|
| |
Complete assembly with pillow block, strut, steering arm and all fasteners. Strut is pre-bent with set length as per title above. The length is the measurement from the bottom of the coil to the center of the axle.
SKU Number: SIGSH630
|
|
|
|
|
| |
Complete assembly with pillow block, strut, steering arm and all fasteners. Strut is pre-bent with set length as per title above. The length is the measurement from the bottom of the coil to the center of the axle.
SKU Number: SIGSH604
|
|
|
|
|
| |
Complete assembly with pillow block, strut, steering arm and all fasteners. Strut is pre-bent with set length as per title above. The length is the measurement from the bottom of the coil to the center of the axle. TEMPORARILY OUT OF STOCK
SKU Number: SIGSH605
|
|
|
|
 "Du-Bro 5/32 Universal Nose Gear Wire Only")
 "Du-Bro 3-3/4 Inch Steerable Nose Gear Bent with 5/32 Inch Wire")
 "Du-Bro 6-5/8 Inch Straight Nose Gear with 5/32 Inch Wire, Un-Bent Axle")
 "NOSE GEAR STRUT 1/8 X 1-3/4")
 "NOSE GEAR STRUT 1/8 X 2-1/4")
 "NOSE GEAR STRUT 1/8 X 3-1/16")
 "Nose Gear Complete Assembly 1/8 X 1-3/4 Inch")
 "Nose Gear Complete Assembly 1/8 X 2-1/4 Inch")
 "Nose Gear Complete Assembly 1/8 X 3-1/16 Inch")
 "Nose Gear Complete Assembly 5/32 X 2 Inch")
 "Nose Gear Complete Assembly 5/32 X 2-1/4 Inch")
 "Nose Gear Complete Assembly 5/32 X 2-1/2 Inch")
 "Nose Gear Complete Assembly 5/32 X 3 Inch")
