|
| |
Allows the connection of XH balance connectors (almost all packs made use this plug) to all Hitec chargers with Lipo/LiFe?LIon charging capability. This board works with almost any charger that has a 7 pin balance input connector with .100" on center pin spacing. If you think your charger is weird or unusual and not this normal spacing, measure from the center to the center of 6 pins, if the measurement is .500" (1/2") and you have 7 pins in total, this balance board and it's harness should work.
SKU Number: HRC44155
|
|
|
|
|
| |
VR-1 Balance Board with Cables for Trak Power LiPo Batteries or any other XH (common) equipped battery being plugged into a Triton, Trak Power VR-1 Charger or TKPP5000. Harness for both 4S and 6s chargers included. Allows connection of the ever popular XH balance end pack to these popular chargers.
SKU Number: TKPP5620
|
|
|
|
|
| |
Connects to wide variety of chargers providing balance adapter board. Fits our Q6, EV680-680 and etc.. XH is most common connector (about 80% of all packs made) like E-Flight, Radical RC, Align, Electri-Fly, Tenergy, HK and many more. Sorry, temporarily out of stock
SKU Number: RRCBABXH
|
|
|
|
|
| |
Balancing board fits many chargers. Handles 2 to 6S packs. Balance connector recepticals are JST-HP which are compatible with Skyholic, True, Hyperion, Polyquest, Max-Amps, XCite, Etech, Impulse and others.
SKU Number: RRCBABHP
|
|
|
|
|
| |
Fits many chargers requiring adapter boards. Allows balancing connection of 2mm pin spacing JST-TP type connectors found on Thunder Power, Flight Power, Spktrum and other lessor known brands.
SKU Number: RRCBABTP
|
|
|
|
|
| |
Allows you to plug in any of the common balance connector types JST;XH, EH, TP, HP, PQ, and Tamiya Life. Plugs are grouped by cell count, one each for each connector and each cell count 2, 3, 4, 5 & 6S. The 4S group can be seen in the near section of the photo. This balance adapter board can be plugged into almost any charger having a 6S XH output plug or any other plug/open pins (such as Hitec chargers) having a 7 pin port for a balance board. Typical chargers requiring a balance board have a standard 7 pin output with .100" spacing. This board could be used with EVERY such charger we sell. Although not shown in photo, the harness to go from this board to the charger balance input is included. Unit will not plug into Triton, FMA or Thunder Power chargers which all use a different pin spacing or different number of pins.
SKU Number: HRC44178
|
|
|
|
|
| |
Allows you to connect 2 to 6S packs with common balance connector type JST;XH and Kokam connectors to your Power Lab 8 charger. May be parallel with other Power Lab 8 balance boards. This item only works the the FMA - Revolectrix Power Lab 8 charger.
SKU Number: CP8S-GP/KO6S-US
|
|
|
|
|
| |
Allows you to connect 2s to 6S Thunder Power and Polyquest packs into your Power Lab 8 charger. May be parallel with other Power Lab 8 balance boards. This item only works the the FMA - Revolectrix Power Lab 8 charger.
SKU Number: CP8S-TP/PQ6S-US
|
|
|
|
|
| |
MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX/TX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and Deans Ultra connectors. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring. (Click here) for full details on this amazing new adapter, only from Revolectrix. Unit includes: support for safe parallel charging of up to 6 same-cell-count packs at one time (2s-8s); supports 40A max charge/discharge rate; every port reverse polarity fuse protection of main battery wires; every cell/balance wire protected by self-resetting poly fuses with temperature warning indicators; supports non-balanced charge of up to two 1s LiPos used with "indoor models"; supports 1 RX and 1 TX NiCd/NiMH battery pack. Works with any Cellpro charger or battery workstation equipped with "XH MODE WIRING" option. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, as well as other brand chargers which are compatible with XH balance plugs and wiring. Be sure to purchase the proper interconnect cable to plug the MPA into your Charger or Battery Workstation.
SKU Number: MPA-XH-US
|
|
|
|
 "Hitec XH 2S-6S Balance Adapter Board")
 "Triton/Track Power XH Balance Board (Track Power VR-1 balance board)")
 "RRC XH 2S-6S Balance Adapter Expansion Board")
 "RRC Balance Adapter Board PolyQuest/Skyholic")
 "RRC Balance Adapter Board Thunder Power/Flight Power")
 "Universal Balance Adapter Board")
 "MPA - Multi-Port Safe Parallel Adapter for XH Compatible Battery Packs DEANS")