|
|
- Whats New >
Radical Specials
|
At these special prices, all sales are considered final. All manufacturers' warranties are in full effect. All items listed here are new, we are just temporarily over stocked. | | | |
With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter (free with included coupon). Specifications Ice 80HV: Dimensions:2.0" (50.8mm) x 2.8" (71.9mm) x 0.9" (23.2mm) Max Input Voltage 3S to 12S Lipo, 9S A123, 22 cells Nicad or NiMH. Max Continuous 80 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd PWM Switching Rate: 8,12 or 16 kHz Weight (w/wires) 4.4 oz. (124.6g) Universal RX Connector BEC: Use external BEC Castle Link Compatible Castle Creations Warranty Info. SKU Number: CCEDGE80HV
|
|
|
| |
With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter (free with included coupon). Specifications Ice 160HV: Dimensions: 2" (50.8mm) x 4.3" (108.4m) x 1.2" (31.5mm) Max Input Voltage 3S to 12S Lipo Max Continuous 160 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd PWM Switching Rate: 8,12 or 16 kHz Weight (w/wires) 8.2 oz. (232.8g) BEC: Use External BEC Universal RX Connector Castle Creations Warranty Info. SKU Number: CCEDGE160HV
|
|
|
| |
With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter (free with included coupon). Specifications Ice 160HV: Dimensions: 2" (50.8mm) x 4.3" (108.4m) x 1.2" (31.5mm) Max Input Voltage 3S to 12S Lipo Max Continuous 160 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd PWM Switching Rate: 8,12 or 16 kHz Weight (w/wires) 8.5 oz. (241g) BEC: Use External BEC Universal RX Connector Castle Creations Warranty Info. SKU Number: CCEDGE160HVF
|
|
|
| |
With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter (free with included coupon). Specifications Ice 60HV: Dimensions:2.0" (50.8mm) x 2.8" (71.9mm) x 0.9" (23.2mm) Max Input Voltage 3S to 12S Lipo, 9S A123, 22 cells Nicad or NiMH. Max Continuous 60 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd PWM Switching Rate: 8,12 or 16 kHz Weight (w/wires) 3.9 oz. (110.2g) BEC: Use External BEC Universal RX Connector Castle Creations Warranty Info. SKU Number: CCEDGE60HV
|
|
|
| |
With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter (free with included coupon). Specifications Ice 40HV: Dimensions:1.7" (43.4mm) x 1.8" (46.3mm) x 0.8" (21.4mm) Max Input Voltage 3S to 12S Lipo Max Continuous 40 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd PWM Switching Rate: 8,12 or 16 kHz Weight (w/wires) 1.1 oz. (30.6g) BEC: Use External BEC Universal RX Connector Castle Creations Warranty Info. SKU Number: CCEDGE40HV
|
|
|
| |
15 AMP control with BEC. . More versitile, capable of flying anything S-400 and below and will handle most 480 setups as well. Note, this control is inexpensive and works well but is about 3x as big as a GFS 12 or Castle 20. Weight 17g, Size 27.5x19.5x6mm.GWS Products warranty info. SKU Number: GWICS400J
|
|
|
| |
30 AMP control with BEC and Brake. More versitile, capable of flying anything S-600 and below that is 30 amps or less. Weight 20g, Size 37x23.5x7mm GWS Products warranty info. While supplies last SKU Number: GWGS600
|
|
|
| |
With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an "unexpected landing", act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility. The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter (free with included coupon while). The following features are included with all EDGE controllers: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software. Castle Field Link Programming Card (sold separately) compatible for select functions. 5 Amp BEC user adjustable from 5 to 8.4 volt output Specifications Ice 50: Dimensions:1.7" (43.4mm) x 2.1" (53.3mm) x 0.8" (21.4mm) Max Input Voltage 2S to 8S Lipo, 9S A123, 22 cells Nicad or NiMH. Max Continuous 50 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd Weight (w/wires) 2.5 oz. (70.8g) Universal RX Connector BEC: Switch rate regulator, 5 amp max adjustable from 5 to 7v in .1v increments. Castle Link Compatible Castle Creations Warranty Info. SKU Number: CCEDGE50
|
|
|
| |
General description same as Castle Edge 50 above. Specifications for the Edge 50 Lite version below. Specifications Ice 50: Dimensions:1.0" (25.4mm) x 2.0" (50.8mm) x 0.9" (23.2mm) Max Input Voltage 2S to 8S Lipo, 9S A123, 22 cells Nicad or NiMH. Max Continuous 50 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd Weight (w/wires) 2.0 oz. (56g) Universal RX Connector BEC: Switch rate regulator, 5 amp max adjustable from 5 to 8.4v in .1v increments. Castle Link Compatible Castle Creations Warranty Info. SKU Number: CCEDGE50L
|
|
|
| |
General description same as Castle Edge 50 above. Specifications for the Edge 75 version below. Specifications Ice 75: Dimensions:2.0" (50.8mm) x 2.8" (71.9mm) x 0.9" (23.2mm) Max Input Voltage 2S to 8S Lipo, 9S A123, 22 cells Nicad or NiMH. Max Continuous 75 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd Weight (w/wires) 4 oz. (113.4g) Universal RX Connector BEC: Switch rate regulator, 5 amp max adjustable from 5 to 8.4v in .1v increments. Castle Link Compatible Castle Creations Warranty Info. SOLD OUT, MANUFACTURER BACKORDER, PENDING PRODUCTION SKU Number: CCEDGE75
|
|
|
| |
General description same as Castle Edge 50 above. Specifications for the Edge 75 LITE version below. Specifications Ice 75: Dimensions:1.2" (30.5mm) x 2.6" (66mm) x 0.8" (21.4mm) Max Input Voltage 2S to 8S Lipo, 9S A123, 22 cells Nicad or NiMH. Max Continuous 75 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd Weight (w/wires) 2.9 oz. (81g) Universal RX Connector BEC: Switch rate regulator, 5 amp max adjustable from 5 to 8.4v in .1v increments. Castle Link Compatible Castle Creations Warranty Info. SKU Number: CCEDGE75L
|
|
|
| |
General description same as Castle Edge 50 above. Specifications for the Edge 100 version below. Specifications Ice 100: Dimensions:1.0" (25.4mm) x 2.0" (50.8mm) x 0.9" (23.2mm) Max Input Voltage 2S to 8S Lipo, 9S A123, 22 cells Nicad or NiMH. Max Continuous 100 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd Weight (w/wires) 2 oz. (56g) Universal RX Connector BEC: Switch rate regulator, 5 amp max adjustable from 5 to 8.4v in .1v increments. Castle Link Compatible Castle Creations Warranty Info. SKU Number: CCEDGE100
|
|
|
| |
General description same as Castle Edge 50 above. Specifications for the Edge Lite 100 version below. Specifications Edge 100 Lite: Dimensions:2.0" (50.8mm) x 2.8" (71.9mm) x 0.9" (23.2mm) Max Input Voltage 2S to 8S Lipo, 9S A123, 22 cells Nicad or NiMH. Max Continuous 100 Amps Brake yes, on/off Reversible yes - change any two wires Low Voltage Cut-off, auto Lipo or NiMH/NiCd Weight (w/wires) 2.6 oz. (72.9g) Universal RX Connector BEC: Switch rate regulator, 5 amp max adjustable from 5 to 8.4v in .1v increments. Castle Link Compatible Castle Creations Warranty Info. SKU Number: CCEDGE100L
|
|
|
| |
This is the male plug used on all the GWS battery packs. Often incorrectly called JST. JST is a company that makes many many plugs! Introduced to the hobby as BEC plugs by Futaba decades ago, Even GWS calls them BEC plugs. Since we like to be accurate, we call them BEC plugs here, too. Built with 20ga Silicone Wire. One of a kind listing, one pack available. SKU Number: RRC2PPS20MFBEC8PK
|
|
|
| |